Net post ratchet

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.

Size: 2x14mt

Color: black.

3mm knotless polypropylene mesh, manufactured, with perimeter finish.

Size: 3x16mt

Color: black.

3mm knotless propiprotileno mesh, manufactured, with perimeter finish.

Size: 2x20mt

Color: black.

3mm knotless propiprotileno mesh, made with perimeter finish.

Size: 3x20mt

Color: black.

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Set of nets for 2 polypropylene handball goals.

Different sizes, colors and designs available.

100mm knotless square mesh, knotless

Mesh of 3, 4, 4.5 and 5mm thick.

* Catalog attached – Request a quote

FEATURES:

Orange color
Controlled particle size

• Screening range diameter 0-1.40 mm.

Uniformity in the raw material
From homogeneous quality baked red brick BIG BAG OF 1000KG
THE CLASSIC…….. FOR YEAR-ROUND USE

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

6 plastic feet and 9 multi-chamber profile slats, 4 positions.

They are manufactured in white and green.

Weight: 16.90 kg

Weight supported: 320kg

• Width: 200cm x Depth 54 cm x Height: 74cm.
• Seat: 200 x 38cm Backrest height: 35cm Seat height: 44cm.

2 years warranty

Manufactured in Germany

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Made with High Tenacity Polypropylene Thread, 4mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty