Picnic Table

429,00 
SKU: MES PIC

Picnic Table

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

You may also be interested in

  • Circular metal trash can 60l

    88,00 
    • BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

    Measurements 885xD370m

    Hinged bucket with safety lock.

    Reinforced feet.

    Zinc-plated and immersion electrowelded steel sheet.

    Painted in gray RAL 7011

  • Atlas Fountain

    519,20 

    Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

    Finished with epoxy primer and gray hammered powder polyester paint.

    Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

  • Semi-circular trash can 40L

    115,50 
    • Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

    Measurements: 455mm diameter, 605mm total height.

    Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

  • 6-space bicycle rack

    159,50 
    • Bicycle rack manufactured in hot-dip galvanized steel.

    Anchoring: Using M8 expansion bolts, depending on the surface and project.

  • Oslo Bench – Various sizes

    324,50 
    • The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
    • The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

    All the screws are made of stainless steel.
    Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

  • Delta Bench – Various sizes

    700,70 

    The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

    Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

    Stainless steel screws.

    Recommended anchoring: By means of M10 expansion bolts according to surface and project.

  • NeoBarcino Bench – Various sizes

    401,50 

    Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

    It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

    We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

    THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

    The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

    optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

    impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

    gray-hammered polyester powder paint.

    The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

    All the screws are made of stainless steel.

    Recommended anchoring: By means of M10 expansion bolts according to surface and project.

  • 2-space bicycle rack

    112,20 
    • Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

    Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

What you’ve seen…

  • Adhesive joint tape 0.15x25mt

    63,80 

    Joint tape for the installation of turf.

    0.15x25mt roll.

  • Beach volleyball net

    Demana pressupost
    • BEACH VOLLEYBALL COMPETITION

    -Measurement: 1.80×1.20×0.70×0.70

    -Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

    -5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

    -Blue tape on the lower part.

    -Tension cords on the upper and lower sides.

    * Also available: beach volleyball training net.

  • Picnic Table

    429,00 

    Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

  • Custom Master PVC paddle tennis net

    159,50 
    • Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

    Minimum 10 units.

  • Mode-Eco-Plast Color Bench

    330,00 
    • Description: Modo ECO-PLAST model bench made of high-quality polypropylene. Materials: Seat and backrest in Polypropylene.

    Legs: High-density polyethylene + Fiberglass

    – UV treated.

    – Maintenance-free.

    – Anti-graffiti.

    – High robustness.

    – Stainless steel screws.

    – Packaging: Palletized and plasticized.

  • Wall-mounted trash can 50l

    112,20 

    UV-resistant wall-mounted trash can.

    Color: Green or orange.

    Capacity 50 l.

    • For fixing to masts, railings or walls.
    • Easy emptying.
    • Fixing accessories and key.
  • Tromber_Tenis MAT

    165,00 

    Accessory for Tromber_Tenis multi-tool

    2 Layers of fine mesh PVC material, with final finish

    Length: 1.15 meters

    Aluminum rule

    Working width: 2 meters

  • Multi-tools – TROMBER_TENIS

    4.224,00 

    It is an electric skate, small in size, customizable,

    optimal for performing tennis court maintenance services

    .

    Its rear anchor allows the following tools to be adapted:

    • Mat
    • Wide yellow brush
    • Toothed scraper
    • Rubber scraper
    • Metallic scratch brush
    • Adjustable water roller.
    • Trailer
  • Sports protection net

    Demana pressupost

    Propiprotileno mesh, custom-made, with perimeter finish.

    Color, thickness, and size to choose.

    • Protection and safety nets for sports fields, prevent balls from hitting spectators or leaving the premises, and protect buildings near the sports area.

    Price to be determined, according to size and thickness

  • Round tennis posts D/83 color

    346,50 

    Set of round tennis posts ø 83 mm.

    Color: Green, white and black

    • Special aluminum profile with 3.5 mm wall thickness, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum wrench for easily tensioning the tennis net.

    Plug-in cast aluminum cap with safety chain.

    Total length of posts 142 cm.

    Weight 10.5 kg.

    Anchor sleeves NOT INCLUDED