Picnic Table

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Dimensions: 273 x 153 x 79.4 cm.

• Playing surface: 4 mm Aluminum/Plastic.
• Aluminum structure 2 x 4 cm.
• Aluminum legs: 8.4 x 8.4 cm with 9 cm diameter levelers.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

Sweeper with Honda GXV 50 engine, powerful and quiet, you will always start the first time. Low emissions and low consumption

The Honda FG 201 B sweeper allows you to easily remove foreign particles on the surface and the green dust from fiber wear, while cleaning all the dirt that is mixed with the sand.

Its high-quality brush system provides excellent sweeping for medium and small debris. You have two types of brush, standard or hard, to choose from depending on the surface to be swept or if you are going to use the machine for maintenance or regeneration of a surface covered with artificial turf.

Scoreboard to adapt to the umpire’s chair.

Legible from the front and back.

With fixing material adaptable to all umpire chairs, numbers 9 cm high.

Manual roller for tennis courts and sports fields.

Working width 90 cm.

Empty weight 60 kg, with water filling 180 kg,

One-piece roller with rounded edges.

Without counterweights (The same model is also manufactured with counterweights)

The new ball collection net eliminates the risk of injuries caused by tennis balls on the court. Whether for individual or group training, when using ball machines, this net prevents tennis balls from rolling around the court. The simple and quick collection of balls also saves time.

• Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.

2 Layers of fine mesh PVC material, with a final finish

Length: 1.15m

Aluminum ruler

Working width: 3m

Replacement court sweeper. 90cm

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.