Picnic Table
Picnic Table
Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.
You may also be interested in
Circular metal trash can 60l
88,00 €- BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.
Measurements 885xD370m
Hinged bucket with safety lock.
Reinforced feet.
Zinc-plated and immersion electrowelded steel sheet.
Painted in gray RAL 7011
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.Atlas Fountain
519,20 €Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.
Finished with epoxy primer and gray hammered powder polyester paint.
Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.
What you’ve seen…
Brown anti-weed textile mesh 2x100mt
282,70 €Anti-weed textile mesh, made of polypropylene.
Resistant to dry rot and fungal attacks.
It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.
2x100mt
Tennis Scoreboard Match Pointer 65×95
236,50 €- Scoreboard with 6 rotating plates, for 3 sets.
Good visibility, can be read from both sides, clear, simple, and easy-to-read design.
Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.
Easy to attach to the fence or net. With fence attachment.
Size: 65x95cm with 12 cm high numbers.
* International lettering: HOME/GUEST.
Sindel 2mt Bench
319,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 6 feet of plastic and 12 multi-chamber profile slats, 4 posts.
They are manufactured in white and green.
Weight: 24.20kg
Supported weight: 360kg
Width: 200cm x Depth: 64cm x Height: 80cm
- Seat: 200 x 45cm Backrest height: 40 cm Seat height: 45 cm
.2 years warranty
Manufactured in Germany
Freiburgh Bench 1.50mt
181,50 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
4 plastic feet and 9 multi-chamber profile slats, reinforcement angle in the middle, 3 positions.
Manufactured in white and green
Weight: 13.6 kg
Supported weight: 240 kg
- Width: 150cm x Depth: 54cm x Height: 74 cm.
- Seat: 150 x 38cm Backrest height: 35cm Seat height: 44cm
2 years warranty
Manufactured in Germany
Royal red ball collector
90,20 €The new ball collection net eliminates the risk of injuries caused by tennis balls on the court. Whether for individual or group training, when using ball machines, this net prevents tennis balls from rolling around the court. The simple and quick collection of balls also saves time.
Sieve or screen
49,50 €Metal mesh sieve or screen.
Various mesh thicknesses from 1.40 to 6.10mm.
To achieve perfect homogenization of the clay court.
Multi-tools – TROMBER_TENIS
4.224,00 €It is an electric skate, small in size, customizable,
optimal for performing tennis court maintenance services
.
Its rear anchor allows the following tools to be adapted:
- Mat
- Wide yellow brush
- Toothed scraper
- Rubber scraper
- Metallic scratch brush
- Adjustable water roller.
- Trailer
Multi-Tool – HONDA FJ500 DLX Tiller
2.310,00 €- The multi-purpose tractor is designed to keep the court in perfect condition thanks to its variety of accessories, and its size, which allows great mobility between courts.
The Honda FJ DLX tiller without a hoe can be adapted to the following tools using a hitch:
- Smooth band wheels on tractor and trailer.
- Milling machine
- Toothed scraper
- Rubber scraper
- Metallic scratch brush
- Adjustable water roller.
- Trailer for transport.
Single posts
55,00 €- Set of single posts for net support.
2 Units
Made of aluminum.
Color: Green, white, black, blue
- Natural aluminum color = €36
Sleeve set for round tennis post D/83
49,50 €Set of 2 aluminum sleeves for round net posts with a diameter of 83mm.


















