PVC Mat 2MT Wood – Fine double mesh
PVC Mat 2MT Wood – Fine double mesh
2 Layers of fine mesh PVC material, with final finish
Length: 1.15mts.
Wooden ruler
Working width: 2 mts.
Very light.
You may also be interested in
Mat hanger bracket
24,20 €Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.
Made of steel, green, plastic-coated for Ø 60 mm posts.
3MT Wood PVC Mat – Fine double mesh
264,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15 meters
Wooden rule
Working width: 3 meters
3MT Aluminum PVC Mat – Fine Double Mesh
341,00 €2 Layers of fine mesh PVC material, with a final finish
Length: 1.15m
Aluminum ruler
Working width: 3m
Rigid rubber scraper 2MT
176,00 €Aluminum profile
Aluminum arch handle
High-strength rigid rubber
Working width: 200cm.
– For water collection
– To remove grit from the court
– For working damp soil.
Sweeping brush 50CM
16,50 €Support: Galician pine wood
Fiber: 1.2mm strong black PVC
Sewn: With galvanized wire
- Galician wood handle 1.2 meters long, adjusted with metal clamp
Narrow steel wire brush, with 2mt arch.
231,00 €- For scraping tennis courts and removing leaves.
- Ideal tool for spring and autumn season.
- Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.
With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.
Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.
Length: 200 cm
Guide rod width: 5 cm
Guide rod height: 3 cm
- Bristle height; 7.5 cm
Bristle distance: approx. 1 cm
- Weight: approx. 5.7 kg
Working width 200 cm.
Leaf collection rake 1MT
99,00 €Aluminum rake with soft rubber teeth
Wooden handle.
For collecting leaves and surface dirt from the court.
Width: 75cm.
Replacement court sweeper
57,20 €Replacement court sweeper. 90cm
What you’ve seen…
Table tennis Mod. Tabarca semi-vandal-proof
1.144,00 €- Semi-vandal-proof outdoor table. 7 mm stratified resin board with strong metal bars that allow the joining of the two boards. Metal profile around the entire perimeter. Zinc-plated metal net. Metal legs lacquered in polyester paint in a V shape for greater resistance (includes screws to anchor to the ground). Dimensions 2740 x 1525 x 760 mm. weight 80 kg.
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Stuttgart Bench 2mt
176,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 6 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 4 posts are manufactured in white or green,
- Weight: 9.9 kg
Weight supported: 320 kg
- Dimensions: Width: 200cm x Depth: 37cm x Height: 41.5cm
Seat: 200 x 37 cm x Seat height: 41.5 cm
- 2 years warranty
(Manufactured in Germany)
Tennis Scoreboard Match Pointer 46x65cm with stand
236,50 €- Scoreboard with 6 rotating plates, for 3 sets.
Good visibility, can be read from both sides, clear, simple, and easy-to-read design.
Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.
Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.
Scoreboard size: 46 x 65 cm with 8 cm high numbers.
* International lettering: HOME/GUEST.
2MT Yellow Brush with Arch
231,00 €1.2mm prolipoptrilene bristles.
Arch-shaped handles and aluminum profile.
2mt working width.
To remove dirt after rain.
For brushing the court.
- * IDEAL TOOL FOR TROMBER TENNIS
Master line sweeper brush, detachable
214,50 €Nylon fiber brush.
Galvanized and painted iron handle.
Easy to use.
Lightweight and easy to handle.
Sweeps the width of the line.
Detachable: Spare parts are available.
BCN fitting with pipe
12,10 €1″ Barcelona aluminum fitting for connection to irrigation hose.
BCN fitting for lance or nozzle
11,00 €- Barcelona 1″ threaded aluminum fitting for lance or nozzle.
Female or male
Multi-tool – Wheel set
407,00 €Set of 2 wheels for power tiller with axle, served assembled to the power tiller.
Smooth tread tire.



















