Ratchet tensioner

103,40 
SKU: US40371

Ratchet tensioner

  • Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.

You may also be interested in

  • STRIPER tracer spray paint

    187,00 

    Special paint for floors, highly resistant and with high pigmentation.

    – Resistant to traffic, inclement weather, and hydrocarbons.

    – Quick-drying paint.

    – CFC and lead-free paint.

    – 7 colors available.
    Price per box of 12 units

  • Tubular anchors for SPEZIALA II

    63,80 

    Anchor set for the installation of Speziala lines: II

    18 stainless steel tubular anchors

    • 8 pieces with 4 cm anchors

    10 pieces with 5 cm anchors.

  • Narrow cement line

    13,20 

    Prefabricated white cement lines, with 2 galvanized iron rods inside.

    Width 5 cm.

    Length 1.20 meters.
    Sold per unit.

  • PVC line set – SPEZIALA II

    657,80 

    Flexible profile made of hard PVC, white color

    Transverse grooves 4 mm wide, at 28 mm intervals.

    18 pieces of anchor pipe

    4 rolls of 24 m = 4 cm

    1 roll of 22 m = 5 cm wide

    • 1 roll of 30 m = 5 cm wide
    • Material needed for the installation of a court, which can be done by one person
    • * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.
  • STRIPER Line Marker

    181,50 

    Line marker for precision lines, especially for marking on artificial and natural grass.

    Maintenance-free.

    No Maintenance or Cleaning Required

    Ergonomic handle.

    Comfortable start-up trigger

    Tracing width adjustment: 3 to 10 cm.

    The aerosol can holder is reinforced

    The wind guard ensures perfect marking

    Highly resistant reinforced metal chassis.

    Lateral support for marking at the edge of pallets, machines, walls, etc.

    Aerosol can compartment for quick paint availability

    Includes tracing cord and can of az

  • Wide cement line

    13,20 

    Prefabricated white cement lines, with 2 galvanized iron rods inside.

    Width 5 cm.

    Length 1.20 meters.

    Sold per unit.

  • Cement line set BL

    1.775,00 

    Prefabricated lines of white cement and marble sand.

    With 2 galvanized iron rods inside.

    • 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
    • Line length: 1.20 meters.

What you’ve seen…

  • Ball collector tube

    16,50 

    Practical tube for collecting balls effortlessly, simply press on the balls that are on the ground and they will enter the tube.

    To empty it, simply open the lid on the other side.

    Length: 120 cm

    Capacity: 17 balls

    Weight: 0.8 kg

  • Royal red ball collector

    90,20 

    The new ball collection net eliminates the risk of injuries caused by tennis balls on the court. Whether for individual or group training, when using ball machines, this net prevents tennis balls from rolling around the court. The simple and quick collection of balls also saves time.

  • Yellow Brush 1MT

    42,90 

    WIDE YELLOW BRUSH 1MT

    Wooden support 1040x65mm

    1.2mm polyprotylene bristles

    Galician wood handle attached with metal clip.

    Working width 1mt.

    To remove dirt after rain.

  • USP10 milling machine

    3.058,00 
    • The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
    • The milled material is ejected and can be transported in wheelbarrows with little effort.

    The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

    • The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

    Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

    • It adapts to all access doors and can be easily operated by a single person.

    TECHNICAL DETAILS:

    • – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

    – Length: approx. 800 mm

    – Width: approx. 850 mm.

    – Height: approx. 1000 mm

    – Milling width: approx. 655 mm

    – Weight: approx. 75 kg

    * Honda engine warranty