Rigid rubber scraper 2MT

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

1.2mm prolipoptrilene bristles.

Arch-shaped handles and aluminum profile.

2mt working width.

To remove dirt after rain.

For brushing the court.

• * IDEAL TOOL FOR TROMBER TENNIS

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Aluminum profile.

Aluminum handle

High-strength rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

Roller with built-in cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless bearings.

For manual use or for multi-tool.

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Metal mesh sieve or screen.

Various mesh thicknesses from 1.40 to 6.10mm.

To achieve perfect homogenization of the clay court.

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Shade/privacy screen, provides privacy and protects from the wind.
Various densities and colors, rolls of different heights and lengths

Produced in a raschel system, non-fraying product, composed of high-density HDPE monofilament and polyethylene raffia tape.

Facilitates privacy in outdoor work.

It can be adapted to the required size due to its easy cutting.

• Option of custom manufacturing with eyelets.

Fabric very resistant to fraying.

With UV treatment for 2 years of protection.

Mesh manufactured in Spain.