Roller with brush

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.

Adapter accessory for roller and brush.

With seat

Support pedals.

Easy assembly.

Wire brush for attaching to a multi-tool

Working width 2MT.

Iron bristles.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

• REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
• TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
• UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
• IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

Total WIDTH: 167 cm

Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

Smooth tread tire.

• The multi-purpose tractor is designed to keep the court in perfect condition thanks to its variety of accessories, and its size, which allows great mobility between courts.

The Honda FJ DLX tiller without a hoe can be adapted to the following tools using a hitch:

• Smooth band wheels on tractor and trailer.
• Milling machine
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer for transport.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

BASIC BADMINTON C-PVC SUPERIOR

-Size: 1.85×1.22m

-Made with High Tenacity Polypropylene Thread.

-2mm thick net, 18mm mesh width.

-White PVC top band, black polyester trim on the sides and bottom of the net.

-One eyelet in each upper corner of the net and double tension cord of 0.3mm.

-0.4mm plasticized steel cable.

* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Made with High Tenacity Polypropylene Thread, 4mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Adapter accessory for roller and brush.

With seat

Support pedals.

Easy assembly.

Set of weights for portable net posts, for professional competitions.

1 set consists of 4 weights, each of 10 kg.