Roller with brush

Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

Smooth tread tire.

Adapter accessory for roller and brush.

With seat

Support pedals.

Easy assembly.

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.

Wire brush for attaching to a multi-tool

Working width 2MT.

Iron bristles.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

• The multi-purpose tractor is designed to keep the court in perfect condition thanks to its variety of accessories, and its size, which allows great mobility between courts.

The Honda FJ DLX tiller without a hoe can be adapted to the following tools using a hitch:

• Smooth band wheels on tractor and trailer.
• Milling machine
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer for transport.

• REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
• TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
• UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
• IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

Total WIDTH: 167 cm

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

3mm knotless polypropylene mesh, manufactured, with perimeter finish.

Size: 3x16mt

Color: black.

FEATURES

• Screening range 0/1mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• Recommended to create a layer on the base and retain maximum moisture.
• IDEAL FOR SUMMER
• 1000KG BIG BAG

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

• Specially designed for children and beginners. The Tennis Twist can be used in clubs and schools, as well as in gardens, driveways and even basements. The machine is very easy to use – just turn it on and it shoots a ball every five seconds. The arc of the ball can be adjusted anywhere from approx. 3 – 6 meters.

Technical data:

Ball capacity: 28 balls

Dimensions (HxWxD): 50 x 20 x 20 cm

Weight: 5 kg

Power: battery

Playing time: 5-6 hours

Feed interval: 5 sec.

Maximum speed: 15 km/h

Ball flight: straight

Lines-directions: 1 direction

Ball spin: no

Case: plastic

Remote control: no on and off switch

Replacement court sweeper. 90cm

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.