Round aluminum volleyball post D/80mm

Posts made of 80 mm round steel, designed to be anchored to the ground

using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in

the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by

lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:

280cm

Solid square volleyball posts made of 80 x 80mm aluminum.

The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.

Surface of the posts and sliding profiles anodized in matte silver.

Anchoring sockets are attached.

• BEACH VOLLEYBALL COMPETITION

-Measurement: 1.80×1.20×0.70×0.70

-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

-Blue tape on the lower part.

-Tension cords on the upper and lower sides.

* Also available: beach volleyball training net.

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Material: 70% PE – 30% PP

Yarn weight: 2070gr/m2

Yarn height: 22mm

Total product height: 24mm

Total product weight: 3000gr/m2

Backing Type: Polyurethane

Standard roll length: 25 m

Standard roll width: 2 – 4 m

Reaction to fire classification: Efl

Color(s): 4 colours

Stitches: 27300

European manufacture

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Dimensions: 273 x 153 x 79.4 cm.

• Playing surface: 4 mm Aluminum/Plastic.
• Aluminum structure 2 x 4 cm.
• Aluminum legs: 8.4 x 8.4 cm with 9 cm diameter levelers.

Solid round volleyball posts, 80 x 80mm, made of aluminum.

The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.

Surface of the posts and sliding profiles anodized in matte silver.

Anchoring sleeves are attached.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Size 110x195cm

Text in Spanish: VISITANTE/LOCAL

Possibility of adding the club’s logo for free.

• Easy and quick installation.

Weatherproof PVC.

They can remain outdoors and require very little maintenance…

Tension mechanism for tennis net posts (internal)