Round aluminum volleyball post D/80mm

Posts made of 80 mm round steel, designed to be anchored to the ground

using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in

the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by

lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:

280cm

• BEACH VOLLEYBALL COMPETITION

-Measurement: 1.80×1.20×0.70×0.70

-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

-Blue tape on the lower part.

-Tension cords on the upper and lower sides.

* Also available: beach volleyball training net.

Solid square volleyball posts made of 80 x 80mm aluminum.

The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.

Surface of the posts and sliding profiles anodized in matte silver.

Anchoring sockets are attached.

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Scoreboard to adapt to the umpire’s chair.

Legible from the front and back.

With fixing material adaptable to all umpire chairs, numbers 9 cm high.

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Metal mesh sieve or screen.

Various mesh thicknesses from 1.40 to 6.10mm.

To achieve perfect homogenization of the clay court.

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, polyester tape on the sides and black polyester trim on the bottom of the net. An eyelet in each corner of the net and 3mm double tension cord. 5mm plasticized steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty

Set of round tennis posts ø 83 mm.

Color: Green, white and black

• Special aluminum profile with 3.5 mm wall thickness, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum wrench for easily tensioning the tennis net.

Plug-in cast aluminum cap with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Anchor sleeves NOT INCLUDED