Round aluminum volleyball post D/80mm
Round aluminum volleyball post D/80mm
Solid round volleyball posts, 80 x 80mm, made of aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sleeves are attached.
You may also be interested in
Volleyball net
Demana pressupostMade with high-tenacity polypropylene thread.
- 3mm thick net, 100mm mesh width.
- Black polyester top band on the sides and at the bottom of the net.
- Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
- 0.6mm plastic-coated steel cable.
- Fiberglass rods inserted on the sides.
- Also available with PVC top tape and for High Competition.
80x80mm Square Aluminum Volleyball Post
616,00 €Solid square volleyball posts made of 80 x 80mm aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sockets are attached.
Beach volleyball net
Demana pressupost- BEACH VOLLEYBALL COMPETITION
-Measurement: 1.80×1.20×0.70×0.70
-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.
-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.
-Blue tape on the lower part.
-Tension cords on the upper and lower sides.
* Also available: beach volleyball training net.
Set of fixed metal volleyball posts adjustable for tennis
407,00 €Posts made of 80 mm round steel, designed to be anchored to the ground
using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in
the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by
lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:
280cm
What you’ve seen…
Table tennis Mod. Tabarca semi-vandal-proof
1.144,00 €- Semi-vandal-proof outdoor table. 7 mm stratified resin board with strong metal bars that allow the joining of the two boards. Metal profile around the entire perimeter. Zinc-plated metal net. Metal legs lacquered in polyester paint in a V shape for greater resistance (includes screws to anchor to the ground). Dimensions 2740 x 1525 x 760 mm. weight 80 kg.
PSB professional baseball base
253,00 €Set of 3 interlocking bases. Benson PSB
Green Manual Roller
2.310,00 €Roller with built-in cleaning brush.
Capacity 330L
Working width 1MT.
Painted with oven drying.
Stainless bearings.
For manual use or for multi-tool.
Sweeping brush 50CM
16,50 €Support: Galician pine wood
Fiber: 1.2mm strong black PVC
Sewn: With galvanized wire
- Galician wood handle 1.2 meters long, adjusted with metal clamp
Tromber_Tenis 1mt metal brush
759,00 €Metal brush to attach to Tromber_Tenis
Working width 1MT.
Iron spikes.
Adjustable height
Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.
* Brush replacement available
Multi-tool – Wheel set
407,00 €Set of 2 wheels for power tiller with axle, served assembled to the power tiller.
Smooth tread tire.
USP10 milling machine
3.058,00 €- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
Bimbi children’s tennis game system
196,90 €Practical mobile net system for children, with tubes that join together.
- Easy to assemble and very stable due to its wide supports.
- 1 nylon net, with automatic tensioning system.
- It can be stored in a small space in its practical bag.
- Size: 6.10 x 0.85 m.
- Approximate weight. 6.5 kg.
Guide center with plastic buckle
11,00 €- Polyester guide center
- Aluminum carabiner.
Plastic adjusting buckle
Bimbi 6m children’s tennis game kit
82,50 €The net system can be set up and dismantled very quickly using a practical connection system.
The net is simply placed on the two supports.
Net tension adjustable to 5 measurements.
Storage bag attached.
Size: 6.10mx 0.85m














