Royal Tournament Umpire Chairs

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Court Royal seat in four different colors.

UV resistant

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

FEATURES

• Screening range 0/2mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• IDEAL FOR SUMMER
• Recommended to create a layer on the base and retain maximum moisture.
• PALLET OF 1200KG 60 bags of 20kg.
• Non-returnable pallet included

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 6 feet of plastic and 12 multi-chamber profile slats, 4 posts.

They are manufactured in white and green.

Weight: 24.20kg

Supported weight: 360kg

Width: 200cm x Depth: 64cm x Height: 80cm

• Seat: 200 x 45cm Backrest height: 40 cm Seat height: 45 cm

.2 years warranty

Manufactured in Germany

• The wide range of speeds makes this machine an excellent choice for all beginners. Due to the small size and light weight, it can be easily stored and fits in almost any car trunk. A good option for sports classes in schools, as well as for private use.

The trajectory of the ball is manually adjustable with the push buttons. The oscillator launches random shots across the court.

Technical data:

Ball capacity: 125 balls

Dimensions: (HxWxD): closed 31 x 50 x 46 cm

Weight: 13 kg

Power supply: battery

Playing time: 2 – 3 hours

Recharge time: 12 hours

Feed interval: 1.5-10 sec.

Maximum speed: 96 km/h

Line-directions: 1 direction and random

Ball spin: no

Case: plastic

Remote control: no: on and off switch

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty

Propiprotileno mesh, custom-made, with perimeter finish.

Color, thickness, and size to choose.

• Protection and safety nets for sports fields, prevent balls from hitting spectators or leaving the premises, and protect buildings near the sports area.

Price to be determined, according to size and thickness

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.