Royal Tournament Umpire Chairs

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Court Royal seat in four different colors.

UV resistant

• Pitching rubber

FEATURES

• Orange color
• Controlled particle size
• Screening range of impalpable minimum dimension and 1.40 mm diameter.
• Uniformity in raw material
• From homogeneous quality baked red brick
• Average humidity 2.50%.
• PALLET OF 1000KG 50 bags of 20kg.

The fastening system is made with Velcro, a simple and quick system that allows you to place or remove the protections quickly and effortlessly.

• They can be manufactured, according to your needs, to protect every peculiarity of the court, from reinforcement fins on the net posts, reinforcement fins on the doors, or even net posts that go up to the upper post of the door.

Advertising can be placed very easily.

Basic kit of two entrances + two net post protectors

Anchor set for the installation of Speziala lines: II

18 stainless steel tubular anchors

• 8 pieces with 4 cm anchors

10 pieces with 5 cm anchors.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Size: 12.70m long, 1.07m high

• Black polyethylene braided thread, 3.8 mm, green with 4.5 cm mesh.
• Hand-knotted, 6 double rows.
• Upper band, made of polyester mesh with 4 stitches. Interior steel cable covered with plastic.

Sides and lower edges with resistant black plastic edges-

• Two 10 mm thick fiberglass rods for lateral fixation.

High quality net.

• Resistant to UV rays, weathering and color resistant.

3 year factory warranty on the net. GS tested according to DIN EN 1510.