Royal Tournament Umpire Chairs

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Court Royal seat in four different colors.

UV resistant

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Joint tape for the installation of turf.

0.15x25mt roll.

In-ground pitcher’s rubber.

• The wide range of speeds makes this machine an excellent choice for all beginners. Due to the small size and light weight, it can be easily stored and fits in almost any car trunk. A good option for sports classes in schools, as well as for private use.

The trajectory of the ball is manually adjustable with the push buttons. The oscillator launches random shots across the court.

Technical data:

Ball capacity: 125 balls

Dimensions: (HxWxD): closed 31 x 50 x 46 cm

Weight: 13 kg

Power supply: battery

Playing time: 2 – 3 hours

Recharge time: 12 hours

Feed interval: 1.5-10 sec.

Maximum speed: 96 km/h

Line-directions: 1 direction and random

Ball spin: no

Case: plastic

Remote control: no: on and off switch

Manufactured with high-quality aluminum and plastics, undoubtedly the strongest and most durable on the market. It moves effortlessly thanks to its wheels, and its speed brake is activated by simply pressing a button. A 46-liter folding box is included for approximately 120 balls. Commercial 32 or 46-liter boxes can also be used. The boxes can be transported on the top, and on the lower shelf.

Technical details

• Load capacity up to 20 kg.
• Lower load capacity up to 40 kg.
• Dimensions: 55 x 103 x 89 cm
• Folded: 55 x 71 x 18 cm
• Basket size: 60 x 34 x 26 cm
• Capacity: 120 balls.
• Weight: 10 kg.
• Sale of replacement baskets.

• The Tennis Tutor PLUS ball machine is battery operated.

It is as portable as a suitcase.

The ball speed is adjustable from a light launching ball for beginners, to a high-speed ball for advanced players.

The trajectory can be set between the net and the baseline, regular ball sequence and arbitrary dispersion angle.

Technical data:

Ball capacity: 150 balls

Dimensions (HxWxD): 51 x 50 x 50 cm

Weight: 21.6 kg

Power connection: Battery operation (charging current 230 V)

Playing time: 4-6 hours

Recharge time: 12 hours

Feed interval: 1.5-10 sec.

Maximum speed: 136 km/h

Trajectory: short – long adjustable

Ball type: Top Spin, Spin, Flat, Cut

Dispersion angle: 1 direction and random

Material: plastic

Remote control: yes, on/off

Size: 12.70m long, 1.07m high

• Black polyethylene braided thread, 3.8 mm, green with 4.5 cm mesh.
• Hand-knotted, 6 double rows.
• Upper band, made of polyester mesh with 4 stitches. Interior steel cable covered with plastic.

Sides and lower edges with resistant black plastic edges-

• Two 10 mm thick fiberglass rods for lateral fixation.

High quality net.

• Resistant to UV rays, weathering and color resistant.

3 year factory warranty on the net. GS tested according to DIN EN 1510.

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.