Royal umpire chair seat

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Aluminum umpire chair.

• Stable step ladder

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Net set for 2 ice hockey and roller hockey goals made of polypropylene.

Dimensions: 1.85 x 1.22 x 0.75 x 1.10mt.

Different colors available.

40mm knotless square mesh

Mesh with a thickness of 3, 4 or 5mm.

In-ground pitcher’s rubber.

3x2mt shock-absorbing net in polypropylene.

Knotless square mesh, 100mm, knotless

3 and 4mm thick mesh.

Different colors.

• The Playmate Volley Dream ball machine is a high-quality portable machine with an aluminum housing and battery supply. It meets the highest safety requirements. There is a sensor installed that immediately stops the ball projection if a person is in the immediate vicinity in the direction of departure. In addition, the new Volley Dream comes with a lockable lid, which must be locked for safety reasons in game mode.

It can be programmed in seven directions. For example: right, center, left, left right, right, center. Similarly, it plays topspin and smash, as well as short-long. The ball output can be adjusted from 6-60 balls per minute. An ideal device for individual or group training. Exact throwing accuracy and quiet operation. With the newly integrated “i-Playmate” attachment, you can use an app to control playmate i-Shmash via i-Phone or i-Pad, as well as record, document and compare your training achievements.
Technical data:

• Capacity: about 180 balls with the lid closed.
• Dimensions: (height x width x depth) 64 x 56 x 48 cm
• Weight: 31 kg
• Power connection: battery operation (charging current 230 V)
• Battery life: min 4 hours
• Charging time: 6 hours
• Maximum speed: 140 km / h
• Ball sequence: 1 – 10 sec.
• Trajectory: short-long, infinitely adjustable ball types top spin, slice
• Shot types: Topspin and smash
• Dispersion angle: 7 directions center-right
• Housing: aluminum with lockable lid
• Safety: Turn off sensors
• Remote control: wireless, on / off

• Royal scoreboard, quality and functionality at an attractive price.
• 4 mm deep-drawn ABS plastic sheets, robust and resistant to weathering and sunlight.

6 non-adhesive rotating plates, 7 cm high, for 3 sets.

Very good visibility, can be read from both sides.

Easy attachment to the fence thanks to the special accessory supplied.

Size approx. 46 x 60 cm with numbers 7 cm high.

* International lettering: HOME/GUEST.

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Spare parts for tennis net posts – Wrench for tensioning mechanism

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.