Sieve or screen

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

Replacement court sweeper. 90cm

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

1.2mm prolipoptrilene bristles.

Arch-shaped handles and aluminum profile.

2mt working width.

To remove dirt after rain.

For brushing the court.

• * IDEAL TOOL FOR TROMBER TENNIS

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

Set of nets for 2 polypropylene handball goals.

Different sizes, colors and designs available.

100mm knotless square mesh, knotless

Mesh of 3, 4, 4.5 and 5mm thick.

* Catalog attached – Request a quote

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)