Table tennis Mod. Garden Blue

• Semi-vandal-proof outdoor table. 7 mm stratified resin board with strong metal bars that allow the joining of the two boards. Metal profile around the entire perimeter. Zinc-plated metal net. Metal legs lacquered in polyester paint in a V shape for greater resistance (includes screws to anchor to the ground). Dimensions 2740 x 1525 x 760 mm. weight 80 kg.

Set of nets for 2 field hockey goals made of polypropylene.

Size: 3.66 x 2.14 x 0.9 x 1.20m

Different colors available.

Knotless square mesh, 45mm, knotless

Mesh 3 or 4mm thick.

* Also available in size for indoor hockey

Description: Modo model bench made of high-quality polyethylene

Materials: Seat and backrest in high-density polyethylene (HDPE).

Legs: High-density polyethylene + Fiberglass

– UV treated.

– Maintenance-free.

– Anti-graffiti.

– High robustness.

– Stainless steel screws.

– Packaging: Palletized and plasticized.

Practical tube for collecting balls effortlessly, simply press on the balls that are on the ground and they will enter the tube.

To empty it, simply open the lid on the other side.

Length: 120 cm

Capacity: 17 balls

Weight: 0.8 kg

• Specially designed for children and beginners. The Tennis Twist can be used in clubs and schools, as well as in gardens, driveways and even basements. The machine is very easy to use – just turn it on and it shoots a ball every five seconds. The arc of the ball can be adjusted anywhere from approx. 3 – 6 meters.

Technical data:

Ball capacity: 28 balls

Dimensions (HxWxD): 50 x 20 x 20 cm

Weight: 5 kg

Power: battery

Playing time: 5-6 hours

Feed interval: 5 sec.

Maximum speed: 15 km/h

Ball flight: straight

Lines-directions: 1 direction

Ball spin: no

Case: plastic

Remote control: no on and off switch

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Accessory for Tromber_tenis, Multiherramienta or manual use

Roller with cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless steel bearings.

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

• Set of single posts for net support.

2 Units

Made of aluminum.

Color: Green, white, black, blue

• Natural aluminum color = €36

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.