Tamper – Rammer

104,50 
SKU: 20127

Tamper – Rammer

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

You may also be interested in

  • 2MT Yellow Brush with Arch

    231,00 

    1.2mm prolipoptrilene bristles.

    Arch-shaped handles and aluminum profile.

    2mt working width.

    To remove dirt after rain.

    For brushing the court.

    • * IDEAL TOOL FOR TROMBER TENNIS
  • Mat hanger bracket

    24,20 

    Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

    Made of steel, green, plastic-coated for Ø 60 mm posts.

  • 1MT court drying roller.

    154,00 

    Rubber foam roller with handle.

    • To remove puddles
    • Working width 90cm

    Aluminum handle with hanging hook

  • Sweeping brush 50CM

    16,50 

    Support: Galician pine wood

    Fiber: 1.2mm strong black PVC

    Sewn: With galvanized wire

    • Galician wood handle 1.2 meters long, adjusted with metal clamp
  • Court drying machine

    1.705,00 

    Absorbent drum with foam covering.

    • Structure and body of the drum, hot-dip galvanized.
    • Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

    Working width 80 cm.

  • Master line sweeper brush, detachable

    214,50 

    Nylon fiber brush.

    Galvanized and painted iron handle.

    Easy to use.

    Lightweight and easy to handle.

    Sweeps the width of the line.

    Detachable: Spare parts are available.

  • Galvanized straightedge

    46,20 

    Galvanized iron square straightedge 50x50x2mm.

    Length: 3 meters.

    For leveling courts.

    Essential for making baselines.

  • Fine-toothed scraper

    93,50 

    Aluminum toothed scraper

    Wooden handle

    Working width 70cm

    • * Replacement saws available

What you’ve seen…

  • MAXI-PAW Sprinkler

    60,50 

    Range: 6.7 to 13.7 meters.
    Pressure: 1.7 to 4.1 bar.
    Flow rate: 0.34 to 1.91 m3/h.

    • Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

    Female side inlet: ½” (15/21)
    Trajectory angle:

    23° for nozzles No. 06, 07, 08, 10 and 12
    11° for nozzles 07-LA and 10-LA

    • MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
    • Low angle nozzles: 07-LA (black), 10-LA (yellow)
  • USP10 milling machine

    3.058,00 
    • The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
    • The milled material is ejected and can be transported in wheelbarrows with little effort.

    The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

    • The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

    Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

    • It adapts to all access doors and can be easily operated by a single person.

    TECHNICAL DETAILS:

    • – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

    – Length: approx. 800 mm

    – Width: approx. 850 mm.

    – Height: approx. 1000 mm

    – Milling width: approx. 655 mm

    – Weight: approx. 75 kg

    * Honda engine warranty