Tilting trailer with universal hitch

495,00 
SKU: 30102

Tilting trailer with universal hitch

  • REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
  • TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
  • UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
  • IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

Total WIDTH: 167 cm

You may also be interested in

  • Multi-tool – Wheel set

    407,00 

    Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

    Smooth tread tire.

  • Multi-Tool – HONDA FJ500 DLX Tiller

    2.310,00 
    • The multi-purpose tractor is designed to keep the court in perfect condition thanks to its variety of accessories, and its size, which allows great mobility between courts.

    The Honda FJ DLX tiller without a hoe can be adapted to the following tools using a hitch:

    • Smooth band wheels on tractor and trailer.
    • Milling machine
    • Toothed scraper
    • Rubber scraper
    • Metallic scratch brush
    • Adjustable water roller.
    • Trailer for transport.
  • Roller with brush

    2.310,00 

    Accessory for Tromber_tenis, Multiherramienta or manual use

    Roller with cleaning brush.

    Capacity 330L

    Working width 1MT.

    Painted with oven drying.

    Stainless steel bearings.

  • Multi-tool – arm with seat

    638,00 

    Adapter accessory for roller and brush.

    With seat

    Support pedals.

    Easy assembly.

  • Multi-tool – Milling machine set

    825,00 

    Set of two cylinders with metal spikes.

    Galvanized and oven-dried painted finish.

    Easy adaptation to the motor hoe.

    Ideal for milling the court, does not lift the rubble.

    Axle included.

  • Multi-tool – Wire brush

    759,00 

    Wire brush for attaching to a multi-tool

    Working width 2MT.

    Iron bristles.

    Adjustable height

    Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

    * Brush replacement available

What you’ve seen…

  • Semi-circular trash can 40L

    115,50 
    • Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

    Measurements: 455mm diameter, 605mm total height.

    Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

  • NeoBarcino Bench – Various sizes

    401,50 

    Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

    It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

    We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

    THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

    The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

    optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

    impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

    gray-hammered polyester powder paint.

    The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

    All the screws are made of stainless steel.

    Recommended anchoring: By means of M10 expansion bolts according to surface and project.

  • Markwort baseball pitching rubber

    123,20 

    In-ground pitcher’s rubber.

  • Anti-freeze pallet

    1.078,00 
    • Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
    • WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

    SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

    • PALLET OF 1250KG 50 bags of 25kg.
  • Foam squeegee with bucket

    126,50 

    Bucket with galvanized grid and sponge with aluminum handle.

    To absorb small puddles on the court.

    There is a replacement for the foam

  • High competition tennis net C-PES

    176,00 

    Made with High Tenacity Polypropylene Thread

    4mm thick net, 43mm mesh width

    White polyester top band

    Black polyester tape on the sides and bottom of the net.

    Two hooks on each side composed of plastic tensioner and 5mm tension cord.

    06mm plasticized steel cable and Fiberglass rods inserted on the sides