USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Mini soccer net
Request a quoteSet of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.
* Catalog attached – Request a quote.
Seaming tape for lawn
13,20 €Seaming tape for lawn installation.
0.30x25mt roll.
2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
Anti-freeze pallet
1.078,00 €- Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
- WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.
SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.
- PALLET OF 1250KG 50 bags of 25kg.
Munich Bench 1.50mt
132,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,
Weight: 7.5 kg
Supported weight: 240 kg
- Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm
Seat: 150 x 37 cm – Seat height: 41.5 cm
- 2 years warranty
(Manufactured in Germany)
Sindel 2mt Bench
319,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 6 feet of plastic and 12 multi-chamber profile slats, 4 posts.
They are manufactured in white and green.
Weight: 24.20kg
Supported weight: 360kg
Width: 200cm x Depth: 64cm x Height: 80cm
- Seat: 200 x 45cm Backrest height: 40 cm Seat height: 45 cm
.2 years warranty
Manufactured in Germany
Cement line set BL
1.775,00 €Prefabricated lines of white cement and marble sand.
With 2 galvanized iron rods inside.
- 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
- Line length: 1.20 meters.
MAXI-PAW Sprinkler
60,50 €Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.- Double female thread lower inlet: ½” (15/21) and ¾” (20/27)
Female side inlet: ½” (15/21)
Trajectory angle:23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA- MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
- Low angle nozzles: 07-LA (black), 10-LA (yellow)
Guide center with velcro
8,25 €Polyester guide center.
Velcro adjusting strap on the ends.
Aluminum carabiner.
Guide center with plastic buckle
11,00 €- Polyester guide center
- Aluminum carabiner.
Plastic adjusting buckle