USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Atlas Fountain
519,20 €Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.
Finished with epoxy primer and gray hammered powder polyester paint.
Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
Picnic Table
429,00 €Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.
2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Deluxe solid basketball hoop
46,20 €Equipped with a new anti-injury system for net placement, guide rod instead of hook.
All our hoops have the same wheelbase, 7 cm high x 8.50 cm wide.
Front paddle protection net 2x14mt.
159,50 €3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.Size: 2x14mt
Color: black.
Cement line set BL
1.775,00 €Prefabricated lines of white cement and marble sand.
With 2 galvanized iron rods inside.
- 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
- Line length: 1.20 meters.
HUNTER PGP-10CM Sprinkler
33,00 €- .• Model: 10 cm
- Sector configuration: from 40° to 360°
- Factory-installed rubber cover
- Top-side sector adjustment
- Quick sector verification mechanism
- Water-lubricated gear drive
- Nozzle types: 27 in total
- Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
- Warranty period: 2 years
Guide center with plastic buckle
11,00 €- Polyester guide center
- Aluminum carabiner.
Plastic adjusting buckle