USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Anti-freeze pallet
1.078,00 €- Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
- WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.
SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.
- PALLET OF 1250KG 50 bags of 25kg.
Master PVC paddle tennis net
110,00 €- Made with High Tenacity Polypropylene Thread
- 4mm thick net, 43mm mesh width.
- White PVC top band,
- Black polyester trim on the sides and bottom of the net.
- One eyelet in each upper corner of the net
- 3mm double tension cord.
- 6mm plastic-coated steel cable
Yellow Brush 1MT
42,90 €WIDE YELLOW BRUSH 1MT
Wooden support 1040x65mm
1.2mm polyprotylene bristles
Galician wood handle attached with metal clip.
Working width 1mt.
To remove dirt after rain.
Court drying machine
1.705,00 €Absorbent drum with foam covering.
- Structure and body of the drum, hot-dip galvanized.
- Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.
Working width 80 cm.
Sieve or screen
49,50 €Metal mesh sieve or screen.
Various mesh thicknesses from 1.40 to 6.10mm.
To achieve perfect homogenization of the clay court.
1MT Aluminum Leveler-
71,50 €For filling holes and leveling irregularities.
Working width 100 cm wide.
With wooden handle.
Tromber_Tenis MAT
165,00 €Accessory for Tromber_Tenis multi-tool
2 Layers of fine mesh PVC material, with final finish
Length: 1.15 meters
Aluminum rule
Working width: 2 meters
Royal umpire chair seat
35,20 €Court Royal seat in four different colors.
UV resistant