USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
Badminton net
Request a quoteBASIC BADMINTON C-PVC SUPERIOR
-Size: 1.85×1.22m
-Made with High Tenacity Polypropylene Thread.
-2mm thick net, 18mm mesh width.
-White PVC top band, black polyester trim on the sides and bottom of the net.
-One eyelet in each upper corner of the net and double tension cord of 0.3mm.
-0.4mm plasticized steel cable.
* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.
Cement line set BL
1.775,00 €Prefabricated lines of white cement and marble sand.
With 2 galvanized iron rods inside.
- 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
- Line length: 1.20 meters.
Replacement court sweeper
57,20 €Replacement court sweeper. 90cm
Leaf collection rake 1MT
99,00 €Aluminum rake with soft rubber teeth
Wooden handle.
For collecting leaves and surface dirt from the court.
Width: 75cm.
Wet system manual irrigation system
Request a quotePush-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.
BCN fitting for lance or nozzle
11,00 €- Barcelona 1″ threaded aluminum fitting for lance or nozzle.
Female or male
MAXI-PAW Sprinkler
60,50 €Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.- Double female thread lower inlet: ½” (15/21) and ¾” (20/27)
Female side inlet: ½” (15/21)
Trajectory angle:23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA- MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
- Low angle nozzles: 07-LA (black), 10-LA (yellow)
Multi-tool – arm with seat
638,00 €Adapter accessory for roller and brush.
With seat
Support pedals.
Easy assembly.