Volleyball net

Request a quote
SKU: 50222

Volleyball net

Made with high-tenacity polypropylene thread.

  • 3mm thick net, 100mm mesh width.
  • Black polyester top band on the sides and at the bottom of the net.
  • Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
  • 0.6mm plastic-coated steel cable.
  • Fiberglass rods inserted on the sides.
  • Also available with PVC top tape and for High Competition.

You may also be interested in

  • 80x80mm Square Aluminum Volleyball Post

    616,00 

    Solid square volleyball posts made of 80 x 80mm aluminum.

    The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.

    Surface of the posts and sliding profiles anodized in matte silver.

    Anchoring sockets are attached.

  • Beach volleyball net

    Request a quote
    • BEACH VOLLEYBALL COMPETITION

    -Measurement: 1.80×1.20×0.70×0.70

    -Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

    -5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

    -Blue tape on the lower part.

    -Tension cords on the upper and lower sides.

    * Also available: beach volleyball training net.

  • Set of fixed metal volleyball posts adjustable for tennis

    407,00 

    Posts made of 80 mm round steel, designed to be anchored to the ground

    using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in

    the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by

    lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:

    280cm

  • Round aluminum volleyball post D/80mm

    594,00 

    Solid round volleyball posts, 80 x 80mm, made of aluminum.

    The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.

    Surface of the posts and sliding profiles anodized in matte silver.

    Anchoring sleeves are attached.

What you’ve seen…

  • Delta Bench – Various sizes

    700,70 

    The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

    Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

    Stainless steel screws.

    Recommended anchoring: By means of M10 expansion bolts according to surface and project.

  • 2-space bicycle rack

    112,20 
    • Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

    Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

  • Front paddle protection net 2x14mt.

    159,50 

    3mm knotless propiprotileno mesh, made with perimeter finish.
    Installation not included.

    Size: 2x14mt

    Color: black.

  • Match Pointer 56×80 Tennis Scoreboard

    226,60 
    • Scoreboard with 6 rotating plates, for 3 sets.

    Good visibility, can be read from both sides, clear, simple, and easy-to-read design.

    Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

    Easy to attach to the fence or net. With fence attachment.

    Size: 56x80cm with 10cm high numbers.

    * International lettering: HOME/GUEST.

  • Scoreboard for umpire chair

    192,50 

    Scoreboard to adapt to the umpire’s chair.

    Legible from the front and back.

    With fixing material adaptable to all umpire chairs, numbers 9 cm high.

  • Freiburgh Bench 1.50mt

    181,50 
    • High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

    4 plastic feet and 9 multi-chamber profile slats, reinforcement angle in the middle, 3 positions.

    Manufactured in white and green

    Weight: 13.6 kg

    Supported weight: 240 kg

    • Width: 150cm x Depth: 54cm x Height: 74 cm.
    • Seat: 150 x 38cm Backrest height: 35cm Seat height: 44cm

    2 years warranty

    Manufactured in Germany

  • Narrow cement line

    13,20 

    Prefabricated white cement lines, with 2 galvanized iron rods inside.

    Width 5 cm.

    Length 1.20 meters.
    Sold per unit.

  • 2MT Yellow Brush with Arch

    231,00 

    1.2mm prolipoptrilene bristles.

    Arch-shaped handles and aluminum profile.

    2mt working width.

    To remove dirt after rain.

    For brushing the court.

    • * IDEAL TOOL FOR TROMBER TENNIS
  • Wet system manual irrigation system

    Request a quote

    Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

  • Master superior C-PES tennis net

    132,00 

    High Tenacity Polypropylene Thread

    4mm thick net, 43mm mesh width.

    White Polyester Top Band

    Polyester tape on the sides and black trim on the bottom

    One eyelet in each corner of the net and 3mm double tension cord.

    6mm plasticized steel cable