Volleyball net
Volleyball net
Made with high-tenacity polypropylene thread.
- 3mm thick net, 100mm mesh width.
- Black polyester top band on the sides and at the bottom of the net.
- Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
- 0.6mm plastic-coated steel cable.
- Fiberglass rods inserted on the sides.
- Also available with PVC top tape and for High Competition.
You may also be interested in
Set of fixed metal volleyball posts adjustable for tennis
407,00 €Posts made of 80 mm round steel, designed to be anchored to the ground
using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in
the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by
lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:
280cm
80x80mm Square Aluminum Volleyball Post
616,00 €Solid square volleyball posts made of 80 x 80mm aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sockets are attached.
Round aluminum volleyball post D/80mm
594,00 €Solid round volleyball posts, 80 x 80mm, made of aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sleeves are attached.
Beach volleyball net
Request a quote- BEACH VOLLEYBALL COMPETITION
-Measurement: 1.80×1.20×0.70×0.70
-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.
-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.
-Blue tape on the lower part.
-Tension cords on the upper and lower sides.
* Also available: beach volleyball training net.
What you’ve seen…
2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
2MT Yellow Brush with Arch
231,00 €1.2mm prolipoptrilene bristles.
Arch-shaped handles and aluminum profile.
2mt working width.
To remove dirt after rain.
For brushing the court.
- * IDEAL TOOL FOR TROMBER TENNIS
Leaf collection rake 1MT
99,00 €Aluminum rake with soft rubber teeth
Wooden handle.
For collecting leaves and surface dirt from the court.
Width: 75cm.
Royal umpire chair seat
35,20 €Court Royal seat in four different colors.
UV resistant