Water collector 145CM

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

Replacement court sweeper. 90cm

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

Manual roller for tennis courts and sports fields.

• Working width 90 cm.

Empty weight 60 kg, with water filling 180 kg

• Divided roller body, which facilitates turning.
• Without counterweights. (Also manufactured with counterweights)

Flexible profile made of hard PVC, white color

Transverse grooves 4 mm wide, at 28 mm intervals.

18 pieces of anchor pipe

4 rolls of 24 m = 4 cm

1 roll of 22 m = 5 cm wide

• 1 roll of 30 m = 5 cm wide
• Material needed for the installation of a court, which can be done by one person
• * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Wire brush for attaching to a multi-tool

Working width 2MT.

Iron bristles.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.