Wet system manual irrigation system

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Nozzle-lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications

Jet, mist and shut-off effects

From JET to MIST position in only 180º

Effective range 24mts jet effect @ 7 bar

Compatible for UNE23400 connection .

Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

Jet, mist and shut-off effects

Fixed teeth

Made of impact-resistant ABS

Effective range 25mts jet effect @ 7 bar

Compatible for UNE23400 1” connection

• Weight: 0.020 kg

• Length: 13 cm

Fitting not included

• Recommended hose line: 25.4 mm

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

1″ Barcelona aluminum fitting for connection to irrigation hose.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

Set of nets for 2 polypropylene handball goals.

Different sizes, colors and designs available.

100mm knotless square mesh, knotless

Mesh of 3, 4, 4.5 and 5mm thick.

* Catalog attached – Request a quote

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 6 feet of plastic and 12 multi-chamber profile slats, 4 posts.

They are manufactured in white and green.

Weight: 24.20kg

Supported weight: 360kg

Width: 200cm x Depth: 64cm x Height: 80cm

• Seat: 200 x 45cm Backrest height: 40 cm Seat height: 45 cm

.2 years warranty

Manufactured in Germany

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle