Wide Yellow Brush Tromber_Tennis

Accessory for Tromber_tenis made of highly resistant rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– To work the damp soil.

Accessory for Tromber_Tenis multi-tool

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Aluminum rule

Working width: 2 meters

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Scraper for scraping compacted soil.

Galvanized iron teeth

Working width 1mt

• * Iron teeth replacement available

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

BASIC BADMINTON C-PVC SUPERIOR

-Size: 1.85×1.22m

-Made with High Tenacity Polypropylene Thread.

-2mm thick net, 18mm mesh width.

-White PVC top band, black polyester trim on the sides and bottom of the net.

-One eyelet in each upper corner of the net and double tension cord of 0.3mm.

-0.4mm plasticized steel cable.

* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 6 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 4 posts are manufactured in white or green,
• Weight: 9.9 kg

Weight supported: 320 kg

• Dimensions: Width: 200cm x Depth: 37cm x Height: 41.5cm

Seat: 200 x 37 cm x Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

6 plastic feet and 9 multi-chamber profile slats, 4 positions.

They are manufactured in white and green.

Weight: 16.90 kg

Weight supported: 320kg

• Width: 200cm x Depth 54 cm x Height: 74cm.
• Seat: 200 x 38cm Backrest height: 35cm Seat height: 44cm.

2 years warranty

Manufactured in Germany

Anchor set for the installation of Speziala lines: II

18 stainless steel tubular anchors

• 8 pieces with 4 cm anchors

10 pieces with 5 cm anchors.

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

1″ Barcelona aluminum fitting for connection to irrigation hose.

Accessory for Tromber_Tenis multi-tool

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Aluminum rule

Working width: 2 meters

• Accessory to attach to Tromber
• Rigid nylon bristles.
• Aluminum support
• 2mt working width.
• To remove dirt after rain.
• Paddle court brushing.