Bimbi children’s post net set with rackets and balls. 6m.

Tension mechanism for tennis net posts (internal)

It is used in ATP and WTA tournaments, Davis Cup and Federation Cup.

Solid aluminum construction with special 80×80 mm profiles.

Natural aluminum color and painted white or black.

Delivered in five pieces, one piece is removed for single use.

Equipped with GS-real cut net posts, with clamping mechanism.

• Delivered with integrated weights, sufficient for amateurs and training use.

For official tournaments we recommend additional weights.

Net is not included.

Set of 2 aluminum sleeves for round net posts with a diameter of 83mm.

Bimbi children’s tennis set of 3.10 m for small court, with 2 Topspin 60 cm tennis rackets and 6 Bimbi Easy balls.

Measurement: 3m 0.85 m

Spare parts for tennis net posts – Wrench for tensioning mechanism

Set of weights for portable net posts, for professional competitions.

1 set consists of 4 weights, each of 10 kg.

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports..

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 3m x 0.85m

Anchor set for the installation of Speziala lines: II

18 stainless steel tubular anchors

• 8 pieces with 4 cm anchors

10 pieces with 5 cm anchors.

Flexible profile made of hard PVC, white color

Transverse grooves 4 mm wide, at 28 mm intervals.

18 pieces of anchor pipe

4 rolls of 24 m = 4 cm

1 roll of 22 m = 5 cm wide

• 1 roll of 30 m = 5 cm wide
• Material needed for the installation of a court, which can be done by one person
• * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, polyester tape on the sides and black polyester trim on the bottom of the net. An eyelet in each corner of the net and 3mm double tension cord. 5mm plasticized steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Aluminum umpire chair.

• Stable step ladder

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm