Master line sweeper brush, detachable

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

Aluminum profile.

Aluminum handle

High-strength rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

Seaming tape for lawn installation.

0.30x25mt roll.

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

Scoreboard to adapt to the umpire’s chair.

Legible from the front and back.

With fixing material adaptable to all umpire chairs, numbers 9 cm high.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

2 plastic feet and 7 multi-chamber profile slats,

• They are manufactured in white or green,

Weight: 13 kg

• Measurement: Width: 120cm
• 2 years warranty

(Manufactured in Germany)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

4 plastic feet and 9 multi-chamber profile slats, reinforcement angle in the middle, 3 positions.

Manufactured in white and green

Weight: 13.6 kg

Supported weight: 240 kg

• Width: 150cm x Depth: 54cm x Height: 74 cm.
• Seat: 150 x 38cm Backrest height: 35cm Seat height: 44cm

2 years warranty

Manufactured in Germany

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

For filling holes and leveling irregularities.

Working width 100 cm wide.

With wooden handle.

1″ Barcelona aluminum fitting for connection to irrigation hose.

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle

High Tenacity Polypropylene Thread

4mm thick net, 43mm mesh width.

White Polyester Top Band

Polyester tape on the sides and black trim on the bottom

One eyelet in each corner of the net and 3mm double tension cord.

6mm plasticized steel cable