MAXI-PAW Sprinkler

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Control the irrigation of your court from your mobile (Wi-Fi) with programming by sectors, adjustable times and flow rates, and manual activation option. Homogeneous coverage on clay, easy installation and maintenance. Request information. Custom projects.

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

Flexible hose made of plasticized food-grade PVC, with polyester textile reinforcement embedded in TPU resin, mechanically strong, blue exterior. Does not stain pavements when rubbed. Resistant to detergents, disinfectant solutions and low-content fats. Resistant to atmospheric agents. Working temperature: -5ºC to +60ºC

Price per 50 meters.

Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

Jet, mist and shut-off effects

Fixed teeth

Made of impact-resistant ABS

Effective range 25mts jet effect @ 7 bar

Compatible for UNE23400 1” connection

• Weight: 0.020 kg

• Length: 13 cm

Fitting not included

• Recommended hose line: 25.4 mm

Nozzle-lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications

Jet, mist and shut-off effects

From JET to MIST position in only 180º

Effective range 24mts jet effect @ 7 bar

Compatible for UNE23400 connection .

1″ Barcelona aluminum fitting for connection to irrigation hose.

3mm knotless propiprotileno mesh, made with perimeter finish.

Size: 3x20mt

Color: black.

FEATURES

• Orange color
• Controlled particle size
• Screening range of impalpable minimum dimension and 1.40 mm diameter.
• Uniformity in raw material
• From homogeneous quality baked red brick
• Average humidity 2.50%.
• PALLET OF 1000KG 50 bags of 20kg.

Nylon fiber brush.

Galvanized and painted iron handle.

Easy to use.

Lightweight and easy to handle.

Sweeps the width of the line.

Detachable: Spare parts are available.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, polyester tape on the sides and black polyester trim on the bottom of the net. An eyelet in each corner of the net and 3mm double tension cord. 5mm plasticized steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Size: 12.70m long, 1.07m high

• Black polyethylene braided thread, 3.8 mm, green with 4.5 cm mesh.
• Hand-knotted, 6 double rows.
• Upper band, made of polyester mesh with 4 stitches. Interior steel cable covered with plastic.

Sides and lower edges with resistant black plastic edges-

• Two 10 mm thick fiberglass rods for lateral fixation.

High quality net.

• Resistant to UV rays, weathering and color resistant.

3 year factory warranty on the net. GS tested according to DIN EN 1510.

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle

• Set of square posts, 80 x 80 mm.

Color: Green, White, black and blue.

Special profile of reinforced aluminum with groove to hold the net retaining rod.

Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.

Cast aluminum clip-on cover that includes safety chain.

Total length of posts: 142 cm. Weight: 10.5 kg.

• Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.