Tromber_Tenis MAT

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

• Accessory to attach to Tromber
• Rigid nylon bristles.
• Aluminum support
• 2mt working width.
• To remove dirt after rain.
• Paddle court brushing.

Accessory for Tromber_tenis made of highly resistant rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– To work the damp soil.

Scraper for scraping compacted soil.

Galvanized iron teeth

Working width 1mt

• * Iron teeth replacement available

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

• Scoreboard with 6 rotating plates, for 3 sets.

Good visibility, can be read from both sides, clear, simple, and easy-to-read design.

Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.

Scoreboard size: 46 x 65 cm with 8 cm high numbers.

* International lettering: HOME/GUEST.

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

Prefabricated white cement lines, with 2 galvanized iron rods inside.

Width 5 cm.

Length 1.20 meters.

Sold per unit.

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Set of 2 aluminum sleeves for round net posts with a diameter of 83mm.