Two-component adhesive 12KG

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

Seaming tape for lawn installation.

0.30x25mt roll.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Joint tape for the installation of turf.

0.15x25mt roll.

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Special pegs for artificial turf.

Pack of 100 units.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

3mm knotless propiprotileno mesh, made with perimeter finish.

Size: 3x20mt

Color: black.

Shoe cleaner made of galvanized steel with high-quality brushes.

With a weather-resistant grid and frame, this shoe cleaner guarantees optimal support on any sports field, whether it’s tennis with clay or rubber granules, or paddle tennis with silica.

• The cleaner ensures that dirt remains on the grid, through the side and bottom bristles that adjust to the footwear. In this way, you can optimally remove all residues and safely reach the changing room.

The brushes are replaceable, high quality and very durable.

Technical characteristics:

Measurement: 495 x 295 x 180 cm

Number of brushes: 3

Inner spacing of the brushes: approx. 9 cm

Height of the brushes: approx. 8 cm

• Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.

Accessory for Tromber_tenis made of highly resistant rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– To work the damp soil.

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Size: 12.70m long, 1.07m high

• Black polyethylene braided thread, 3.8 mm, green with 4.5 cm mesh.
• Hand-knotted, 6 double rows.
• Upper band, made of polyester mesh with 4 stitches. Interior steel cable covered with plastic.

Sides and lower edges with resistant black plastic edges-

• Two 10 mm thick fiberglass rods for lateral fixation.

High quality net.

• Resistant to UV rays, weathering and color resistant.

3 year factory warranty on the net. GS tested according to DIN EN 1510.