Two-component adhesive 12KG

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Seaming tape for lawn installation.

0.30x25mt roll.

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

Special pegs for artificial turf.

Pack of 100 units.

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Joint tape for the installation of turf.

0.15x25mt roll.

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

3mm knotless propiprotileno mesh, manufactured, with perimeter finish.

Size: 2x20mt

Color: black.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

Metal mesh sieve or screen.

Various mesh thicknesses from 1.40 to 6.10mm.

To achieve perfect homogenization of the clay court.

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Tension mechanism for tennis net posts (internal)