USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Two-component adhesive 12KG
52,80 €Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.
12KG can.
The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.
All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.
Badminton net
Request a quoteBASIC BADMINTON C-PVC SUPERIOR
-Size: 1.85×1.22m
-Made with High Tenacity Polypropylene Thread.
-2mm thick net, 18mm mesh width.
-White PVC top band, black polyester trim on the sides and bottom of the net.
-One eyelet in each upper corner of the net and double tension cord of 0.3mm.
-0.4mm plasticized steel cable.
* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.
Sindel 2mt Bench
319,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 6 feet of plastic and 12 multi-chamber profile slats, 4 posts.
They are manufactured in white and green.
Weight: 24.20kg
Supported weight: 360kg
Width: 200cm x Depth: 64cm x Height: 80cm
- Seat: 200 x 45cm Backrest height: 40 cm Seat height: 45 cm
.2 years warranty
Manufactured in Germany
Cement line set BL
1.775,00 €Prefabricated lines of white cement and marble sand.
With 2 galvanized iron rods inside.
- 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
- Line length: 1.20 meters.
SPECIAL US II Manual Roller
1.056,00 €Manual roller for tennis courts and sports fields.
- Working width 90 cm.
Empty weight 60 kg, with water filling 180 kg
- Divided roller body, which facilitates turning.
- Without counterweights. (Also manufactured with counterweights)
Narrow cement line
13,20 €Prefabricated white cement lines, with 2 galvanized iron rods inside.
Width 5 cm.
Length 1.20 meters.
Sold per unit.
2MT Yellow Brush with Arch
231,00 €1.2mm prolipoptrilene bristles.
Arch-shaped handles and aluminum profile.
2mt working width.
To remove dirt after rain.
For brushing the court.
- * IDEAL TOOL FOR TROMBER TENNIS
Galvanized straightedge
46,20 €Galvanized iron square straightedge 50x50x2mm.
Length: 3 meters.
For leveling courts.
Essential for making baselines.
Multi-tool – arm with seat
638,00 €Adapter accessory for roller and brush.
With seat
Support pedals.
Easy assembly.