USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
Cement line set BL
1.775,00 €Prefabricated lines of white cement and marble sand.
With 2 galvanized iron rods inside.
- 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
- Line length: 1.20 meters.
SPECIAL US I Manual Roller
808,50 €Manual roller for tennis courts and sports fields.
Working width 90 cm.
Empty weight 60 kg, with water filling 180 kg,
One-piece roller with rounded edges.
Without counterweights (The same model is also manufactured with counterweights)
2MT Yellow Brush with Arch
231,00 €1.2mm prolipoptrilene bristles.
Arch-shaped handles and aluminum profile.
2mt working width.
To remove dirt after rain.
For brushing the court.
- * IDEAL TOOL FOR TROMBER TENNIS
Sieve or screen
49,50 €Metal mesh sieve or screen.
Various mesh thicknesses from 1.40 to 6.10mm.
To achieve perfect homogenization of the clay court.
Master superior C-PES tennis net
132,00 €High Tenacity Polypropylene Thread
4mm thick net, 43mm mesh width.
White Polyester Top Band
Polyester tape on the sides and black trim on the bottom
One eyelet in each corner of the net and 3mm double tension cord.
6mm plasticized steel cable